Vision Vent S pro

With the rooflights of the VisionVent series from MPK, condensation in caravans and motorhomes doesn't stand a chance. Thanks to an ingenious design with covered ventilation, air cushions to prevent dripping and channels for drainage, condensation is minimised even in unfavourable weather and intensive use of the camper van interior. The aerodynamic design makes travelling more pleasant through lower driving noise and less draught. 


  • Large dome for rain protection
  • High UV protection due to tinted dome material
  • Telescopic display unit, tiltable on four sides, with locking device
  • Modern interior frame with double pleated blind
  • Approval: ECE R43 -019652


Condensation water protection:

  • Covered ventilation in inner dome
  • with condensation stop
  • Air cushion reduces drop formation
  • Channels drain off condensation water

Improved flow behaviour:

  • aerodynamic dome
  • lower driving noise
  • Less draught despite continuous ventilation

Technical data

Cut-out dimension 280 x 280 mm
Roof thicknesses from - to 24-46 mm und 42-72 mm
Corner radius 18 mm
Dome size 380 x 395 mm
Continuous ventilation 75 cm²
Height above roof 80 mm
Frame dimensions 365 x 340 x 32 mm
Recommended maximum speed 130 km/h

Article numbers

Roof thick-ness From - to Blackout Frame colour whi-te Frame colour signal white Weight ap-prox.
24-46 mm Without 2753VPNW 2753VPSNW 1750 g
24-46 mm With 2753VPW 2753VPSW 1800 g
46-72 mm Without 2763VPNW 2763VPNSW 1830 g
46-72 mm With 2763VPW 2763VPSW 1880 g


Installation and Operating instructions VisionVent S pro
pdf, 335.9 KB

Buy rooflights

Our original MPK rooflights are available from stationary caravaning dealers and all popular online shops.

To the dealer overview